Question 1

How much does Counterpressure turbine without adjustable steam extraction, single-cylinder type P, capacity:; 6000 kW cost per t in London?

Accepted Answer

The estimated cost of Counterpressure turbine without adjustable steam extraction, single-cylinder type P, capacity:; 6000 kW is £5.845,29 per t in London, based on 92 priced resources covering materials, labour and equipment.

Question 2

How many workers are needed for Counterpressure turbine without adjustable steam extraction, single-cylinder type P, capacity:; 6000 kW?

Accepted Answer

Counterpressure turbine without adjustable steam extraction, single-cylinder type P, capacity:; 6000 kW requires approximately 505 people per unit, totalling about 504 labour hours per t.

Question 3

What does the Counterpressure turbine without adjustable steam extraction, single-cylinder type P, capacity:; 6000 kW cost estimate include?

Accepted Answer

It includes a full breakdown of 92 resources — materials, labour and machinery — with current pricing for London.


ME_MEKAKA_PUME	Worker Category 1	hrs
KAME-ME-KAME-KADX_KAKATOKA	General-purpose asbestos cord, diameter 18-25 mm	t
KAME-ME-KARI-KAPU_KAKAMERI	General-purpose asbestos cardboard, grade KAON-1, thickness 4 and 6 mm	t
KAME-ME-KARI-KAVO_MEKAPUKA	PMB brand paronite sheet (PON-A, PON-B), thickness from 0.4 to 5 mm	kg
KAME-TO-KAME-KALI_KAKAKAME	Synthetic butyl alcohol	t
KAME-TO-KARI-KARI_KAKAKARI	Argon gas, highest grade	m3
KAME-TO-KARI-KAVO_KAKAKAME	Technical gaseous oxygen	m3
KAME-TO-KARI-KADX_KAKARIRI	Propane-butane technical mixture	kg
KAME-TO-KATO-KANE_KAKAKATO	Technical hydrochloric acid	kg
KAME-TO-KAPU-KALI_KAKAKAME	Turbine oil	kg
KAME-TO-KASA-MEKA_KAKAKANE	Crystalline casting graphite, grade GL-1	kg
KAME-LI-KARI-KALI_KAKAMEME	Pressboard, grade A	kg
KAME-LI-KATO-KAME_KAKAKARI	Tap water	m3
KAME-LI-KATO-KAPU_KAKAKAME	Electricity	kWh
KAME-LI-KALI-KADX_KAKAPUME	Gland packings, AP grade	kg
KAME-LI-KALI-KADX_KAKAPUTO	Impregnated cotton gland packings, brand XBP	kg
KAME-LI-MEME-KAPU_KAKASAME	SV-04X19H11M3 welding wire, diameter 2 mm	kg
KAME-LI-MEME-KAPU_KAKASARI	Uncoated welding wire SV-08G2S, diameter 2 mm	kg
KAME-LI-MEME-KALI_KAKATOKA	Welding electrodes for welding corrosion-resistant chromium-nickel and chromium-nickel-molybdenum steels EA 400/10U, diameter 3 mm	kg
KAME-LI-MEME-KALI_KARIRILI	Welding electrodes for welding low-alloy and carbon steels UONI 13/45, E42A, diameter 4-5 mm	kg
KAME-LI-MEME-KALI_KARITOSA	Welding electrodes for welding alloyed high-strength and heat-resistant steels, TS-20, diameter 3 mm	kg
KAME-LI-MEME-KALI_KARITONE	Welding electrodes for welding alloyed high-strength and heat-resistant steels TS-39, diameter 2.5 mm	kg
KAME-LI-MEME-KALI_KATOMETO	Tungsten welding electrodes for welding high-alloy and refractory steels	kg
KAME-LI-MESA-KATO_KAKAPURI	Bolts with nuts and washers for construction	kg
KAME-LI-MESA-KANE_KAMEMEME	Construction nails	t
KAME-LI-MESA-MEKA_KAKASAPU	Metal staples for installation	kg
KAME-LI-MEDX-KAPU_KAKARIPU	TMKSh technical rubber plates, thickness 2-40 mm	kg
KALI-RI-KALI-KAPU_KAKAKALI	Custom-made steel structures from rolled steel	t
KAVO-ME-KARI-KAPU_KAKAKAME	White electrolytic tinplate, thickness 0.22-0.25 mm	kg
KAVO-TO-KARI-KAME_KAKARIDX	Hot-rolled steel strips, steel grades St3sp, St3ps, thickness 3.5 mm, width 100-220 mm	t
KAVO-TO-KAPU-KARI_KAKADXSA	Hot-rolled round steel bars, steel grades St3sp, St3ps, diameter 14-50 mm	t
KAVO-TO-KASA-KARI_KAKARIME	Hot-rolled sheet metal, steel grades St3sp, St3ps, width 1200-3000 mm, thickness 1-8 mm	t
KAVO-TO-KASA-KASA_KAKATOME	Roofing sheet steel, grade STK-1, thickness 0.5 mm	t
KAVO-TO-KALI-KAME_KAKASARI	Hot-rolled steel strip, steel grades St3sp, St3ps, dimensions 50x5 mm	t
KAVO-TO-KAVO-KARI_KAKAPUSA	Hot-rolled steel angle bar with equal flanges, steel grades St3sp, St3ps, flange width 63-100 mm, flange thickness 4-16 mm	t
KAVO-TO-MEME-KAME_MEMEKARI	Hot-rolled steel channels, steel grades St3ps, St3sp, No. 12U-24U, No. 12P-24P	t
MEKA-RI-KARI-KATO_MEKATORI	Cold-rolled brass sheets, grade L85, thickness from 0.2 to 2.0 mm	t
MEKA-RI-KARI-KAPU_KAKAKAVO	Hot-rolled copper sheets, grade M2, thickness 3 mm	t
MEKA-RI-KARI-MEKA_KAKAMETO	Round copper rods, grade M3, diameter 10-30 mm	t
MEKA-TO-KAME-KANE_KAKAKARI	Round lead wire, diameter 11 mm	kg
MEKA-TO-KARI-KARI_KAKAMETO	Tin, grade O1PCH	kg
MEKA-TO-KARI-KASA_KAKAMERI	Lead in ingots C0, C1	t
MEME-ME-KARI-KAME_KAKATOME	Round hardwood timber, unpeeled, length 3-6.5 m, diameter 14-24 cm, grade II-III	m3
MEME-ME-KATO-KAME_KAKANELI	Edged softwood timber (spruce, pine), natural moisture content, length 2-6.5 m, width 100 mm and above, thickness 100 mm and above, grade III	m3
MEME-ME-KATO-KASA_KAKALITO	Unedged softwood boards, natural moisture content, length 2-6.5 m, width 100-250, thickness 20 mm, grade III	m3
MEME-RI-MEME-KAPU_KAMEKAME	Plywood with outer layers of birch veneer, grade FSF, class I/II, sanded, thickness 4 mm	m3
MEPU-PU-KARI-KAPU_KAMEPURI	MA-0115 oil paint, mummy, iron minium	kg
MEPU-PU-KARI-KAPU_KAMENERI	Oil paint MA-011-0, MA-011-1, MA-011-1N, MA-011-2, MA-011-2N	t
MEPU-PU-KATO-KARI_KAKAMEME	Bakelite varnish LBS-1, LBS-2	t
MEPU-SA-KASA-KAME_KAKAMERI	Combined drying oil for diluting thick oil paints and for exterior work on wooden surfaces	t
RISA-ME-KAME-KAPU_KAKATOME	Coniferous wood sleeper, untreated, for broad gauge railways, type I	Nr
DXME-KASA-KARI_KAKASA	Gantry cranes, lifting capacity 32 t	Machine hours
PU_MEKAKA_KANEKA	Personnel: 1 person-hour/machine-hour	Machine hours
DXME-KASA-KARI_KAKASA	Electricity: consumption 36.3 kW·h/machine-hour	Machine hours
DXME-KASA-KAPU_KAKASA	Electric overhead cranes, lifting capacity 5 t	Machine hours
PU_MEKAKA_KAPUKA	Personnel: 1 person-hour/machine-hour	Machine hours
DXME-KASA-KAPU_KAKASA	Electricity: consumption 2.97 kW·h/machine-hour	Machine hours
DXME-KASA-KAPU_KAKAVO	Electric overhead cranes, lifting capacity 20 t	Machine hours
PU_MEKAKA_KASAKA	Personnel: 1 person-hour/machine-hour	Machine hours
DXME-KASA-KAPU_KAKAVO	Electricity: consumption 26.73 kWh/machine-hour	Machine hours
DXME-KANE-KATO_KANEME	Electric winches with a pulling force of up to 12.26 kN (1.25 t)	Machine hours
DXME-KANE-KATO_KANEME	Electricity: consumption 0.26 kW·h/machine-hour	Machine hours
DXME-KADX-KATO_KATOSA	Wide gauge platforms, load capacity 73 t	Machine hours
DXME-KADX-KASA_KARIRI	Broad gauge shunting locomotives, power 550 kW (559.3 kW)	Machine hours
PU_MEKAKA_KASAKA	Personnel: 1 person-hour/machine-hour	Machine hours
DXME-MEKA-KAPU_KAPUME	Equipment for chemical cleaning of oil pipelines	Machine hours
DXME-MELI-KARI_KATORI	Ultrasonic flaw detectors, thickness of the product being inspected up to 6000 mm	Machine hours
DXME-MELI-KARI_KAVOME	Universal styloscopes	Machine hours
DXME-MELI-KARI_KAVOME	Electricity: consumption 0.24 kW·h/machine-hour	Machine hours
DXME-MELI-KATO_KAPUME	Units for heating metal barrels with a capacity of 200 l, power 3 kW	Machine hours
DXME-MELI-KATO_KAPUME	Electricity: consumption 0.99 kWh/machine-hour	Machine hours
DXME-MELI-KAPU_RITORI	Three-phase welding inverters for argon arc welding, maximum welding current 500 A	Machine hours
DXME-MELI-KAPU_RITORI	Electricity: consumption 3.52 kW·h/machine-hour	Machine hours
DXME-MELI-KAPU_RITOTO	Welding machines for manual arc welding, welding current up to 350 A	Machine hours
DXME-MELI-KAPU_RITOTO	Electricity: consumption 3.7 kWh/machine-hour	Machine hours
DXME-MEVO-KAME_SAKAVO	Mobile screw compressors with electric motor, pressure up to 1 MPa (10 atm), capacity up to 5 m3/min	Machine hours
DXME-MEVO-KAME_SAKAVO	Electricity: consumption 12.21 kW·h/machine-hour	Machine hours
DXME-MEDX-KAVO_KAMESA	Pumps, capacity 200 m3/h, head 25 m, power 22 kW	Machine hours
DXME-MEDX-KAVO_KAMESA	Electricity: consumption 7.26 kW·h/machine-hour	Machine hours
DXME-RIME-MEDX_KATORI	Metal planing machines	Machine hours
DXME-RIME-MEDX_KATORI	Electricity: consumption 1.82 kW·h/machine-hour	Machine hours
DXME-RIME-MEDX_KATOTO	Turning and screw-cutting machines	Machine hours
PU_MEKAKA_KASAKA	Personnel: 1 person-hour/machine-hour	Machine hours
DXME-RIME-MEDX_KATOTO	Electricity: consumption 2.52 kW·h/machine-hour	Machine hours
DXME-RIME-MEDX_KATOPU	Double-sided grinding machines	Machine hours
PU_MEKAKA_KAPUKA	Personnel: 1 person-hour/machine-hour	Machine hours
DXME-RIME-MEDX_KATOVO	Metal milling machines	Machine hours
DXME-RIME-MEDX_KATOVO	Electricity: consumption 0.5 kW·h/machine-hour	Machine hours
DXME-RIME-RIRI_MEDXRI	Hole reaming machines	Machine hours
DXME-RIME-RIRI_MEDXRI	Electricity: consumption 0.4 kW·h/machine-hour	Machine hours
DXME-RIME-RIRI_PUDXME	Universal hydraulic pipe benders	Machine hours
DXME-RIME-RIRI_PUDXME	Electricity: consumption 0.25 kW·h/machine-hour	Machine hours
CO₂ (kg) — Zusammenfassung
CO₂ (kg) wird analysiert...

Reg. Price — Zusammenfassung
Reg. Price wird analysiert...

Alternative — Zusammenfassung
Alternative wird analysiert...

Optimization — Zusammenfassung
Optimization wird analysiert...

Where to Buy — Zusammenfassung
Where to Buy wird analysiert...

Safety / PPE — Zusammenfassung
Safety / PPE wird analysiert...

Each step is explained individually:

1Excavation — Machine removal of soil material...

2Loading — Transport of material into wagons...

3Compaction — Soil compaction at destination...

AI description under each work step

QR Code & Share

Zur Kalkulation hinzufügen

Each step is explained individually: 1Excavation — Machine removal of soil material... 2Loading — Transport of material into wagons... 3Compaction — Soil compaction at destination... AI description under each work step

QR Code & Share

Zur Kalkulation hinzufügen

Each step is explained individually:

1Excavation — Machine removal of soil material...

2Loading — Transport of material into wagons...

3Compaction — Soil compaction at destination...

AI description under each work step