AI
Workers
Use this position in your own project
The price above is a reference benchmark. OpenConstructionERP lets you reuse this position in a full project estimate — with your regional prices, quantities and margins.
KI
Work Steps
Generating image...
15-30 seconds
Error
:
|
CO₂ (kg)
|
|
Alternative
|
Optimization
|
Where to Buy
|
Safety / PPE
|
|||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KAME-PU-KAME-KANE | Drill bit for blasting holes | Nr | ||||||||||
| KAVO-TO-KAVO-KARI | Hot-rolled equal angle steel | t | ||||||||||
| KAVO-PU-KATO-KATO | Periodic profile reinforcing steel | t | ||||||||||
| MEME-ME-KATO-KANE | Edged boards | m3 | ||||||||||
| RITO-SA-KARI-KARI | Steel pipes | m | ||||||||||
| RI_MEKAKA_KARI | 2nd grade worker | hrs | ||||||||||
| RI_MEKAKA_KATO | Grade 3 worker | hrs | ||||||||||
| RI_MEKAKA_KAPU | Grade 4 worker | hrs | ||||||||||
| RI_MEKAKA_KASA | Grade 5 worker | hrs | ||||||||||
| KAME-TO-KARI-KAVO_KAKAKAME | Technical gaseous oxygen | m3 | ||||||||||
| KAME-TO-KARI-KADX_KAKARIRI | Propane-butane technical mixture | kg | ||||||||||
| KAME-PU-KATO-KAPU_KAKAMEME | Hexagonal hollow drill steel 55S2, outer size 22 mm, inner diameter 6.5 mm | t | ||||||||||
| KAME-LI-KATO-KAPU_KAKAKAME | Electricity | kWh | ||||||||||
| KAME-LI-KADX-KAME_KAKAKAME | Ammonite 6ZhV in cartridge form, diameter 32 mm | t | ||||||||||
| KAME-LI-KADX-KARI_KAKATORI | ZD-8-Zh instantaneous electric detonators | 1000 Nr | ||||||||||
| KAME-LI-KADX-KATO_KAKAKAME | APRN wire for blasting operations, VP brand | 1000 m | ||||||||||
| KAME-LI-MEME-KALI_KARIRILI | Welding electrodes for welding low-alloy and carbon steels UONI 13/45, E42A, diameter 4-5 mm | kg | ||||||||||
| KAME-LI-MESA-KATO_KAKARIRI | Galvanized steel bolts with hexagonal head, complete with hexagonal nut and flat round washer, thread diameter M16 (M18), bolt length 25-200 mm | t | ||||||||||
| KAME-LI-MESA-KATO_MEKAKARI | Bolts for mounting steel structures, complete with nuts and washers, diameter 24-48 mm, length 55-300 mm | kg | ||||||||||
| KAME-LI-MESA-KATO_MEKAKAPU | Bolts for mounting steel structures, complete with nuts and washers, diameter 6-8 mm, length 55-80 mm | kg | ||||||||||
| KAME-LI-MESA-KANE_KAMEMEME | Construction nails | t | ||||||||||
| KAME-LI-RIKA-KAVO_KAKARIME | Fireproof impregnated canvas | m2 | ||||||||||
| KALI-RI-KALI-MERI_KAKAKAME | Auxiliary metal structures predominantly made of thick-gauge steel or rolled sections, with or without holes | t | ||||||||||
| KAVO-ME-KARI-MELI_KAKATOME | Single woven steel mesh made of uncoated wire with diamond-shaped cells, wire diameter 1.2 mm, cell size 10x10 mm | m2 | ||||||||||
| KAVO-TO-KATO-KANE_KAKAMERI | Low-carbon steel knitting wire | t | ||||||||||
| KAVO-TO-KASA-KARI_KAKARIME | Hot-rolled sheet metal, steel grades St3sp, St3ps, width 1200-3000 mm, thickness 1-8 mm | t | ||||||||||
| KAVO-TO-KANE-KAME_KAKARIPU | Hot-rolled corrugated steel sheet, steel grades St3sp, St3ps, thickness 2-6 mm | t | ||||||||||
| RITO-TO-KATO-KARI_KAMERISA | Seamless hot-rolled steel pipes with chamfered edges, made of steel grades 10, 20, 35, outer diameter 146 mm, wall thickness 8 mm | m | ||||||||||
| RITO-TO-KANE-KARI_KAKAKAVO | Galvanized welded steel pipes for water and gas with thread, ordinary, nominal diameter 80 mm, wall thickness 4 mm | m | ||||||||||
| RITO-TO-KAVO-KAME_KAKARILI | Square electric welded steel pipes, dimensions 40x40 mm, wall thickness 4 mm | t | ||||||||||
| DXME-KATO-KANE_KARIRI | Wheeled-rail loading machines for horizontal workings with a cross-section of more than 8 m2, pneumatic | Machine hours | ||||||||||
| DXME-KATO-KAVO_KAKATO | Portable column drills for drilling holes and wells when working from stationary compressor stations | Machine hours | ||||||||||
| DXME-KANE-KATO_KAPULI | Manual and lever winches with a pulling force of 31.39 kN (3.2 t) | Machine hours | ||||||||||
| DXME-KANE-KATO_KAPUDX | Manual and lever winches with a pulling force of up to 9.81 kN (1 t) | Machine hours | ||||||||||
| DXME-KADX-KARI_KAKARI | Non-tipping wheelbarrows, capacity 1.4 m3 | Machine hours | ||||||||||
| DXME-KADX-KARI_KAKATO | Tipping wagons, capacity 0.8 m3 | Machine hours | ||||||||||
| DXME-MELI-KAPU_KAPURI | Gas welding and cutting equipment | Machine hours | ||||||||||
| DXME-MELI-KAPU_RITOTO | Welding machines for manual arc welding, welding current up to 350 A | Machine hours | ||||||||||
| DXME-MELI-KAPU_RITOTO | Electricity: consumption 3.7 kWh/machine-hour | Machine hours | ||||||||||
| DXME-RIME-MEKA_KAKAME | Pneumatic jackhammers for use with stationary compressor stations | Machine hours | ||||||||||
| DXME-RIME-MENE_KAKAME | Combined electric press shears, nominal force 630 kN, power 5 kW | Machine hours | ||||||||||
| PU_MEKAKA_KAPUKA | Personnel: 1 person-hour/machine-hour | Machine hours | ||||||||||
| DXME-RIME-MENE_KAKAME | Electricity: consumption 1.58 kW·h/machine-hour | Machine hours | ||||||||||
| DXME-RIME-MEDX_KATOME | Drilling machines | Machine hours | ||||||||||
| DXME-RIME-MEDX_KATOME | Electricity: consumption 0.45 kW·h/machine-hour | Machine hours | ||||||||||
|
CO₂ (kg) — Zusammenfassung
|
||||||||||||
|
CO₂ (kg) wird analysiert...
|
||||||||||||
|
Reg. Price — Zusammenfassung
|
||||||||||||
|
Reg. Price wird analysiert...
|
||||||||||||
|
Alternative — Zusammenfassung
|
||||||||||||
|
Alternative wird analysiert...
|
||||||||||||
|
Optimization — Zusammenfassung
|
||||||||||||
|
Optimization wird analysiert...
|
||||||||||||
|
Where to Buy — Zusammenfassung
|
||||||||||||
|
Where to Buy wird analysiert...
|
||||||||||||
|
Safety / PPE — Zusammenfassung
|
||||||||||||
|
Safety / PPE wird analysiert...
|
||||||||||||
approx.
| kWh | ||||||
|---|---|---|---|---|---|---|
|
KI
|
- | |||||