Question 1

How much does Gas turbine plant, capacity 100,000 kW cost per t in London?

Accepted Answer

The estimated cost of Gas turbine plant, capacity 100,000 kW is £2.948,82 per t in London, based on 83 priced resources covering materials, labour and equipment.

Question 2

How many workers are needed for Gas turbine plant, capacity 100,000 kW?

Accepted Answer

Gas turbine plant, capacity 100,000 kW requires approximately 114 people per unit, totalling about 113 labour hours per t.

Question 3

What does the Gas turbine plant, capacity 100,000 kW cost estimate include?

Accepted Answer

It includes a full breakdown of 83 resources — materials, labour and machinery — with current pricing for London.


ME_MEKAKA_PUTO	Worker Category 1	hrs
KAME-ME-KAME-KADX_KAKATOKA	General-purpose asbestos cord, diameter 18-25 mm	t
KAME-ME-KARI-KAPU_KAKAMERI	General-purpose asbestos cardboard, grade KAON-1, thickness 4 and 6 mm	t
KAME-ME-KARI-KAVO_MEKAPUKA	PMB brand paronite sheet (PON-A, PON-B), thickness from 0.4 to 5 mm	kg
KAME-TO-KARI-KARI_KAKAKARI	Argon gas, highest grade	m3
KAME-TO-KARI-KAVO_KAKAKAME	Technical gaseous oxygen	m3
KAME-TO-KARI-KADX_KAKARIRI	Propane-butane technical mixture	kg
KAME-TO-KATO-KANE_KAKAKATO	Technical hydrochloric acid	kg
KAME-TO-KAPU-KALI_KAKAKAME	Turbine oil	kg
KAME-TO-KASA-MEKA_KAKAKANE	Crystalline casting graphite, grade GL-1	kg
KAME-TO-KASA-MENE_KAKAKAME	Calcium babbitt	t
KAME-LI-KARI-KASA_KAKAMEME	Electrical sheet laminate, grade 1, thickness 0.2-0.35 mm	kg
KAME-LI-KARI-KALI_KAKAMEME	Pressboard, grade A	kg
KAME-LI-KATO-KAME_KAKAKARI	Tap water	m3
KAME-LI-KATO-KAPU_KAKAKAME	Electricity	kWh
KAME-LI-KASA-KADX_KAKAMERI	Textolite sheet for crafting, thickness from 1 to 3 mm	kg
KAME-LI-KALI-KADX_KAKAPUME	Gland packings, AP grade	kg
KAME-LI-KALI-KADX_KAKAPUTO	Impregnated cotton gland packings, brand XBP	kg
KAME-LI-MEME-KAPU_KAKASAME	SV-04X19H11M3 welding wire, diameter 2 mm	kg
KAME-LI-MEME-KALI_KARIRILI	Welding electrodes for welding low-alloy and carbon steels UONI 13/45, E42A, diameter 4-5 mm	kg
KAME-LI-MEME-KALI_KATOMETO	Tungsten welding electrodes for welding high-alloy and refractory steels	kg
KAME-LI-MESA-KATO_KAKAPURI	Bolts with nuts and washers for construction	kg
KAME-LI-MESA-KANE_KAMEMEME	Construction nails	t
KAME-LI-MESA-MEKA_KAKASAPU	Metal staples for installation	kg
KALI-RI-KALI-KAPU_KAKAKALI	Custom-made steel structures from rolled steel	t
KAVO-ME-KARI-KAPU_KAKAKAME	White electrolytic tinplate, thickness 0.22-0.25 mm	kg
KAVO-TO-KARI-KAME_KAKARIDX	Hot-rolled steel strips, steel grades St3sp, St3ps, thickness 3.5 mm, width 100-220 mm	t
KAVO-TO-KAPU-KARI_KAKADXSA	Hot-rolled round steel bars, steel grades St3sp, St3ps, diameter 14-50 mm	t
KAVO-TO-KASA-KASA_KAKATOME	Roofing sheet steel, grade STK-1, thickness 0.5 mm	t
KAVO-TO-KALI-KAME_KAKASARI	Hot-rolled steel strip, steel grades St3sp, St3ps, dimensions 50x5 mm	t
KAVO-TO-KAVO-KARI_KAKAPUSA	Hot-rolled steel angle bar with equal flanges, steel grades St3sp, St3ps, flange width 63-100 mm, flange thickness 4-16 mm	t
KAVO-TO-MEME-KAME_MEMEKARI	Hot-rolled steel channels, steel grades St3ps, St3sp, No. 12U-24U, No. 12P-24P	t
KAVO-TO-MERI-KANE_KAKARIRI	Steel, grade 08Kh18N10T, thickness 4-16 mm	t
KAVO-TO-MERI-KANE_KAKARITO	Steel, grade 08kp	t
MEKA-RI-KARI-KATO_MEKATORI	Cold-rolled brass sheets, grade L85, thickness from 0.2 to 2.0 mm	t
MEKA-RI-KARI-KAPU_KAKAKAVO	Hot-rolled copper sheets, grade M2, thickness 3 mm	t
MEKA-RI-KARI-MEKA_KAKAMETO	Round copper rods, grade M3, diameter 10-30 mm	t
MEKA-TO-KAME-KANE_KAKAKARI	Round lead wire, diameter 11 mm	kg
MEKA-TO-KARI-KARI_KAKAMETO	Tin, grade O1PCH	kg
MEKA-TO-KARI-KASA_KAKAMERI	Lead in ingots C0, C1	t
MEME-ME-KARI-KAME_KAKATOME	Round hardwood timber, unpeeled, length 3-6.5 m, diameter 14-24 cm, grade II-III	m3
MEME-ME-KATO-KAME_KAKANELI	Edged softwood timber (spruce, pine), natural moisture content, length 2-6.5 m, width 100 mm and above, thickness 100 mm and above, grade III	m3
MEME-ME-KATO-KASA_KAKALITO	Unedged softwood boards, natural moisture content, length 2-6.5 m, width 100-250, thickness 20 mm, grade III	m3
MEME-RI-MEME-KAPU_KAMEKAME	Plywood with outer layers of birch veneer, grade FSF, class I/II, sanded, thickness 4 mm	m3
MEPU-PU-KARI-KAPU_KAMEPURI	MA-0115 oil paint, mummy, iron minium	kg
MEPU-PU-KARI-KAPU_KAMENERI	Oil paint MA-011-0, MA-011-1, MA-011-1N, MA-011-2, MA-011-2N	t
MEPU-PU-KATO-KARI_KAKAMEME	Bakelite varnish LBS-1, LBS-2	t
MEPU-SA-KASA-KAME_KAKAMERI	Combined drying oil for diluting thick oil paints and for exterior work on wooden surfaces	t
RISA-ME-KAME-KAPU_KAKATOME	Coniferous wood sleeper, untreated, for broad gauge railways, type I	Nr
DXME-KASA-KARI_KAKANE	Gantry cranes, lifting capacity 50 t	Machine hours
PU_MEKAKA_KASASA	Personnel: 2 person-hours/machine-hour	Machine hours
DXME-KASA-KARI_KAKANE	Electricity: consumption 51.15 kWh/machine-hour	Machine hours
DXME-KASA-KAPU_KAMETO	Electric bridge cranes, lifting capacity 125 t	Machine hours
PU_MEKAKA_KANEKA	Personnel: 1 person-hour/machine-hour	Machine hours
DXME-KASA-KAPU_KAMETO	Electricity: consumption 53.13 kWh/machine-hour	Machine hours
DXME-KANE-KATO_KANETO	Electric winches with a pulling force of up to 49.05 kN (5 t)	Machine hours
DXME-KANE-KATO_KANETO	Electricity: consumption 0.53 kW·h/machine-hour	Machine hours
DXME-KADX-KATO_KATOSA	Wide gauge platforms, load capacity 73 t	Machine hours
DXME-KADX-KASA_KARIRI	Broad gauge shunting locomotives, power 550 kW (559.3 kW)	Machine hours
PU_MEKAKA_KASAKA	Personnel: 1 person-hour/machine-hour	Machine hours
DXME-MEKA-KAPU_KAPUME	Equipment for chemical cleaning of oil pipelines	Machine hours
DXME-MELI-KARI_KATORI	Ultrasonic flaw detectors, thickness of the product being inspected up to 6000 mm	Machine hours
DXME-MELI-KAPU_RITORI	Three-phase welding inverters for argon arc welding, maximum welding current 500 A	Machine hours
DXME-MELI-KAPU_RITORI	Electricity: consumption 3.52 kW·h/machine-hour	Machine hours
DXME-MELI-KAPU_RITOTO	Welding machines for manual arc welding, welding current up to 350 A	Machine hours
DXME-MELI-KAPU_RITOTO	Electricity: consumption 3.7 kWh/machine-hour	Machine hours
DXME-MEVO-KAME_SAKAVO	Mobile screw compressors with electric motor, pressure up to 1 MPa (10 atm), capacity up to 5 m3/min	Machine hours
DXME-MEVO-KAME_SAKAVO	Electricity: consumption 12.21 kW·h/machine-hour	Machine hours
DXME-MEDX-KAVO_KAMESA	Pumps, capacity 200 m3/h, head 25 m, power 22 kW	Machine hours
DXME-MEDX-KAVO_KAMESA	Electricity: consumption 7.26 kW·h/machine-hour	Machine hours
DXME-RIME-MEDX_KATORI	Metal planing machines	Machine hours
DXME-RIME-MEDX_KATORI	Electricity: consumption 1.82 kW·h/machine-hour	Machine hours
DXME-RIME-MEDX_KATOTO	Turning and screw-cutting machines	Machine hours
PU_MEKAKA_KASAKA	Personnel: 1 person-hour/machine-hour	Machine hours
DXME-RIME-MEDX_KATOTO	Electricity: consumption 2.52 kW·h/machine-hour	Machine hours
DXME-RIME-MEDX_KATOPU	Double-sided grinding machines	Machine hours
PU_MEKAKA_KAPUKA	Personnel: 1 person-hour/machine-hour	Machine hours
DXME-RIME-MEDX_KATOVO	Metal milling machines	Machine hours
DXME-RIME-MEDX_KATOVO	Electricity: consumption 0.5 kW·h/machine-hour	Machine hours
DXME-RIME-RIRI_MEDXRI	Hole reaming machines	Machine hours
DXME-RIME-RIRI_MEDXRI	Electricity: consumption 0.4 kW·h/machine-hour	Machine hours
DXME-RIME-RIRI_PUDXME	Universal hydraulic pipe benders	Machine hours
DXME-RIME-RIRI_PUDXME	Electricity: consumption 0.25 kW·h/machine-hour	Machine hours
CO₂ (kg) — Zusammenfassung
CO₂ (kg) wird analysiert...

Reg. Price — Zusammenfassung
Reg. Price wird analysiert...

Alternative — Zusammenfassung
Alternative wird analysiert...

Optimization — Zusammenfassung
Optimization wird analysiert...

Where to Buy — Zusammenfassung
Where to Buy wird analysiert...

Safety / PPE — Zusammenfassung
Safety / PPE wird analysiert...

Each step is explained individually:

1Excavation — Machine removal of soil material...

2Loading — Transport of material into wagons...

3Compaction — Soil compaction at destination...

AI description under each work step

QR Code & Share

Zur Kalkulation hinzufügen

Each step is explained individually: 1Excavation — Machine removal of soil material... 2Loading — Transport of material into wagons... 3Compaction — Soil compaction at destination... AI description under each work step

QR Code & Share

Zur Kalkulation hinzufügen

Each step is explained individually:

1Excavation — Machine removal of soil material...

2Loading — Transport of material into wagons...

3Compaction — Soil compaction at destination...

AI description under each work step