AI
CSI
NRM2
Workers
Quick Facts
Total Cost
0
Workers/Unit
h
Labor Hours
0
Resources
0
Machines
0
Steps
KI
Work Steps
Generating image...
15-30 seconds
Error
:
|
CO₂ (kg)
|
|
Alternative
|
Optimization
|
Where to Buy
|
Safety / PPE
|
|||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KAME-NE-KAME-KARI | Plasterboard sheets | m2 | ||||||||||
| MERI-RI-KATO-MESA | Mineral fiber thermal insulation materials | m2 | ||||||||||
| ME_MEKAKA_TOSA | Worker Category 1 | hrs | ||||||||||
| KAME-LI-KATO-KAME_KAKAKAME | Water | m3 | ||||||||||
| KAME-LI-KATO-KAPU_KAKAKAME | Electricity | kWh | ||||||||||
| KAME-LI-KANE-KAME_KAKAPURI | Elastic self-adhesive tapes for guide profiles 50x30000 mm | m | ||||||||||
| KAME-LI-KANE-KAPU_KAKAKARI | Perforated paper reinforcement tapes for increasing the crack resistance of joints, width 52 mm | m | ||||||||||
| KAME-LI-KANE-KAPU_KAKAKALI | Paper tapes for creating artificial cracks between frame structures and adjacent surfaces, with an adhesive layer on one side and an anti-adhesive coating on the other, white, width 65 mm | 100 m | ||||||||||
| KAME-LI-MESA-KALI_KAKAVORI | Polypropylene anchor dowel nails with flange, diameter 6 mm, length 40 mm | 100 Nr | ||||||||||
| KAME-LI-MESA-MEPU_KAKAPUPU | Self-tapping steel screws, oxidized, with countersunk head and cross-shaped slot, pointed, diameter 3.5 mm, length 25 mm | 100 Nr | ||||||||||
| KAME-LI-MESA-MEPU_KAKAPUSA | Self-tapping steel screws, oxidized, with countersunk head and cross-shaped slot, pointed, diameter 3.5 mm, length 35 mm | 100 Nr | ||||||||||
| KAME-LI-MESA-MEPU_KAKAPUNE | Self-tapping steel screws, oxidized, with countersunk head and cross-shaped slot, pointed, diameter 3.5 mm, length 55 mm | 100 Nr | ||||||||||
| KALI-RI-KANE-KATO_KAMEMERI | Galvanized steel guide profile for installing gypsum partitions and suspended ceilings, dimensions 50x40 mm, steel thickness 0.6 mm | m | ||||||||||
| KALI-RI-KANE-KATO_KAMEDXSA | Galvanized steel rack profile, dimensions 50x50 mm, thickness 0.6 mm | m | ||||||||||
| KALI-RI-KANE-KAPU_KAKAMEME | Upper and lower corners for fastening door load-bearing elements, dimensions 100x123 mm | 100 Nr | ||||||||||
| MEME-ME-KATO-KAME_KAKAKAME | Planed softwood bars (pine, spruce), dimensions 50x50 mm, grade AB | m3 | ||||||||||
| MEPU-PU-KAME-KARI_KAKAMERI | Deep-penetrating, quick-drying, vapor-permeable strengthening primer | kg | ||||||||||
| MEPU-SA-MEME-KATO_KAKAKAME | Dry putty mixes based on high-strength gypsum with polymer additives, aggregate size no more than 0.15 mm, flexural strength 2.7 MPa | kg | ||||||||||
| MEPU-SA-MEME-KATO_KAKAKAPU | Universal dry putty mixtures based on gypsum with polymer additives, aggregate size not exceeding 0.2 mm, flexural strength not less than 1.0 MPa | kg | ||||||||||
| DXME-KASA-KASA_KAMESA | Mobile cranes, lifting capacity 16 t | Machine hours | ||||||||||
| PU_MEKAKA_KANEKA | Personnel: 1 person-hour/machine-hour | Machine hours | ||||||||||
| DXME-MEPU-KARI_KAKAME | Flatbed trucks, load capacity up to 5 tons | Machine hours | ||||||||||
| PU_MEKAKA_KAPUKA | Personnel: 1 person-hour/machine-hour | Machine hours | ||||||||||
| DXME-RIME-MERI_KAKAPU | Electric shears | Machine hours | ||||||||||
| DXME-RIME-MERI_KAKAPU | Electricity: consumption 0.23 kW·h/machine-hour | Machine hours | ||||||||||
|
CO₂ (kg) — Zusammenfassung
|
||||||||||||
|
CO₂ (kg) wird analysiert...
|
||||||||||||
|
Reg. Price — Zusammenfassung
|
||||||||||||
|
Reg. Price wird analysiert...
|
||||||||||||
|
Alternative — Zusammenfassung
|
||||||||||||
|
Alternative wird analysiert...
|
||||||||||||
|
Optimization — Zusammenfassung
|
||||||||||||
|
Optimization wird analysiert...
|
||||||||||||
|
Where to Buy — Zusammenfassung
|
||||||||||||
|
Where to Buy wird analysiert...
|
||||||||||||
|
Safety / PPE — Zusammenfassung
|
||||||||||||
|
Safety / PPE wird analysiert...
|
||||||||||||
approx.
| kWh | ||||||
|---|---|---|---|---|---|---|
|
KI
|
- | |||||