AI
CSI
NRM2
Workers
Quick Facts
Total Cost
0
Workers/Unit
h
Labor Hours
0
Resources
0
Machines
0
Steps
KI
Work Steps
Generating image...
15-30 seconds
Error
:
|
CO₂ (kg)
|
|
Alternative
|
Optimization
|
Where to Buy
|
Safety / PPE
|
|||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ME_MEKAKA_TODX | Worker Category 1 | hrs | ||||||||||
| KAME-ME-KAME-KADX_KAKARIDX | General-purpose asbestos cord, diameter 15 mm | t | ||||||||||
| KAME-ME-KARI-KARI_KAKARITO | BE electrical insulation asbestos paper, thickness 0.4-0.5 mm | t | ||||||||||
| KAME-ME-KARI-KAPU_KAKAMERI | General-purpose asbestos cardboard, grade KAON-1, thickness 4 and 6 mm | t | ||||||||||
| KAME-ME-KARI-KASA_KAMERIRI | Dry asbestos packings, open weave, round, grade AS, diameter 6-14 mm | t | ||||||||||
| KAME-TO-KAME-KALI_KAKAKADX | Rectified technical ethyl alcohol, grade I | kg | ||||||||||
| KAME-TO-KARI-KATO_KAKAKAME | Acetylene gas, technical grade | m3 | ||||||||||
| KAME-TO-KARI-KAVO_KAKAKAME | Technical gaseous oxygen | m3 | ||||||||||
| KAME-TO-KARI-KADX_KAKARIRI | Propane-butane technical mixture | kg | ||||||||||
| KAME-TO-KASA-KATO_KAKATOME | Ammonium chloride, chemically pure | t | ||||||||||
| KAME-TO-KASA-KALI_KAKAMEME | Borax (sodium tetraborate) | kg | ||||||||||
| KAME-TO-KASA-MELI_KAKAKARI | Pine rosin | kg | ||||||||||
| KAME-TO-KASA-RITO_KAMELIME | Calcined soda (sodium carbonate) technical grade | t | ||||||||||
| KAME-LI-KARI-KANE_KAKAMELI | Construction cardboard spacer, grade B | t | ||||||||||
| KAME-LI-KARI-KALI_KAKAMEME | Pressboard, grade A | kg | ||||||||||
| KAME-LI-KARI-KADX_KAKAKARI | Paper twine, diameter 2.5 mm | kg | ||||||||||
| KAME-LI-KATO-KAPU_KAKAKAME | Electricity | kWh | ||||||||||
| KAME-LI-KANE-KASA_KAKAPURI | PVC insulating tape for electrical installation and repair work, black, width 19 mm, thickness 0.18 mm | m | ||||||||||
| KAME-LI-KALI-KAVO_KAKAKATO | Hard laundry soap 72% | Nr | ||||||||||
| KAME-LI-KALI-MELI_KAKAMEME | White carbon black, silicon dioxide mass fraction not less than 88%, moisture mass fraction not more than 6.5%, specific surface area by phenol adsorption 40±10 m2/g | t | ||||||||||
| KAME-LI-KALI-RIDX_KAMEKAME | Linen thread | kg | ||||||||||
| KAME-LI-KAVO-KAPU_KAKAKATO | Natural ground chalk | t | ||||||||||
| KAME-LI-MEKA-KASA_KAKAKAME | Ground coke | t | ||||||||||
| KAME-LI-MEME-KAPU_KAKASARI | Uncoated welding wire SV-08G2S, diameter 2 mm | kg | ||||||||||
| KAME-LI-MEME-KALI_KARIPUNE | Welding electrodes for welding heat-resistant austenitic and high-strength structural steels EA-395, diameter 2-5 mm | kg | ||||||||||
| KAME-LI-MESA-KARI_KAKAVORI | Steel bolts with hexagonal heads, thread diameter M8 (M10, M12, M14), length 16-160 mm | t | ||||||||||
| KAME-LI-MESA-KANE_KAMERIME | Steel construction nails, diameter 1.6 mm, length 50 mm | t | ||||||||||
| KAME-LI-MESA-MEPU_KAMENETO | Self-tapping steel screws with a semi-circular head and a straight slot, pointed, diameter 3.5 mm, length 30-35 mm | kg | ||||||||||
| KAME-LI-MELI-MEME_KAKAMEME | Two-layer sanding paper with a grain size of 40-25 | m2 | ||||||||||
| KAME-LI-MEDX-KAPU_KAKATOME | Rubber gaskets (pressed technical plate) | kg | ||||||||||
| KAME-LI-MEDX-KADX_KAKARIME | Rubber-fabric pressure hose for water with a pressure of 1 MPa (10 kgf/cm2), inner diameter 16 mm | m | ||||||||||
| KAME-LI-MEDX-MELI_KAKATOSA | Round rubber cord, diameter from 6.0 to 8.0 mm | kg | ||||||||||
| KAME-LI-RIKA-KARI_KAKAKARI | Coarse technical felt for insulation, dark, thickness 8-10 mm | kg | ||||||||||
| KAME-LI-RIKA-KAVO_KAKARIME | Fireproof impregnated canvas | m2 | ||||||||||
| KAME-LI-RIKA-KAVO_KAKAPUME | Three-strand twisted rope made of hemp fiber, diameter from 6 to 22 mm | t | ||||||||||
| KAVO-RI-KARI-MEKA_KAKAPUME | Uncoated double-twisted TK rope, 6x37(1+6+12+18)+1x37(1+6+18) construction, grade B, made of uncoated wire, marking group 1570-1770 N/mm2, diameter 6.4 mm | 10 m | ||||||||||
| KAVO-TO-KATO-KAPU_KAKAMERI | Light wire, diameter 1.1 mm | t | ||||||||||
| MEKA-RI-KARI-KANE_KAKAMENE | Brass strips, cold-rolled, hard, normal precision, grade L63, random length, width 40-100 mm, thickness 3.0 mm | t | ||||||||||
| MEKA-TO-KARI-KAME_KAKAKARI | Tin and lead babbitt in ingots, grade B83 | t | ||||||||||
| MEKA-TO-KARI-KATO_KAKAKARI | Tin-lead solder without antimony in ingots, grade POS30 | kg | ||||||||||
| MEME-ME-KARI-KAPU_KAKATOME | Round coniferous timber, unpeeled, length 3-6.5 m, diameter 14-24 cm, grade II-III | m3 | ||||||||||
| MEME-ME-KATO-KASA_KAKANESA | Unedged coniferous boards, natural moisture content, length 2-6.5 m, width 100-250, thickness 30-50 mm, grade III | m3 | ||||||||||
| MERI-ME-KARI-KANE_MEKAKAVO | Roofing felt RKC-400 | m2 | ||||||||||
| MEPU-ME-KAME-KAME_KAKAKAME | Casein glue | t | ||||||||||
| MEPU-RI-KARI-KATO_KAKAKAME | Single-component water-dispersion fire-retardant paint for increasing the fire resistance of steel structures up to 90 minutes, intumescent type, mass fraction of non-volatile substances not less than 67%, color white | t | ||||||||||
| MEPU-PU-KARI-KAPU_KAMEPURI | MA-0115 oil paint, mummy, iron minium | kg | ||||||||||
| MEPU-PU-KARI-KAPU_KAMEPUTO | MA-0115 oil paint, ochre | kg | ||||||||||
| MEPU-PU-KARI-KAPU_KAMENERI | Oil paint MA-011-0, MA-011-1, MA-011-1N, MA-011-2, MA-011-2N | t | ||||||||||
| MEPU-PU-KATO-KARI_KAKAMENE | LBS-20 bakelite varnish | t | ||||||||||
| MEPU-PU-KATO-KATO_KAMEKARI | BT-577 bitumen varnish | t | ||||||||||
| MEPU-PU-KAPU-KAVO_KAKAKAME | PF-115 enamel | t | ||||||||||
| MEPU-SA-KASA-KAME_KAKAMERI | Combined drying oil for diluting thick oil paints and for exterior work on wooden surfaces | t | ||||||||||
| MEPU-SA-KANE-KARI_KAKAKARI | Chromium oxide-based grinding paste, No. 1, No. 2, No. 3, No. 4 | kg | ||||||||||
| MEPU-SA-KADX-KAME_KAKAKATO | Technical acetone, highest grade | kg | ||||||||||
| RIME-ME-KASA-KAME_KAKAMEVO | Flexible power cable with copper conductors H07RN-F 1x50-660 | 1000 m | ||||||||||
| RIME-ME-KANE-KAVO_KAKARINE | Power cable with aluminum conductors ASB 3x70(oz)-1000 | 1000 m | ||||||||||
| DXME-KASA-KAPU_KAMEKA | Electric bridge cranes, load capacity 50 t | Machine hours | ||||||||||
| PU_MEKAKA_KASAKA | Personnel: 1 person-hour/machine-hour | Machine hours | ||||||||||
| DXME-KASA-KAPU_KAMEKA | Electricity: consumption 46.7 kW·h/machine-hour | Machine hours | ||||||||||
| DXME-KASA-KASA_KAMESA | Mobile cranes, lifting capacity 16 t | Machine hours | ||||||||||
| PU_MEKAKA_KANEKA | Personnel: 1 person-hour/machine-hour | Machine hours | ||||||||||
| DXME-MELI-KAPU_RITOTO | Welding machines for manual arc welding, welding current up to 350 A | Machine hours | ||||||||||
| DXME-MELI-KAPU_RITOTO | Electricity: consumption 3.7 kWh/machine-hour | Machine hours | ||||||||||
| DXME-MEVO-KAME_KAKALI | Mobile screw compressors with internal combustion engines, pressure up to 0.7 MPa (7 atm), capacity up to 5.4 m3/min | Machine hours | ||||||||||
| PU_MEKAKA_KAPUKA | Personnel: 1 person-hour/machine-hour | Machine hours | ||||||||||
|
CO₂ (kg) — Zusammenfassung
|
||||||||||||
|
CO₂ (kg) wird analysiert...
|
||||||||||||
|
Reg. Price — Zusammenfassung
|
||||||||||||
|
Reg. Price wird analysiert...
|
||||||||||||
|
Alternative — Zusammenfassung
|
||||||||||||
|
Alternative wird analysiert...
|
||||||||||||
|
Optimization — Zusammenfassung
|
||||||||||||
|
Optimization wird analysiert...
|
||||||||||||
|
Where to Buy — Zusammenfassung
|
||||||||||||
|
Where to Buy wird analysiert...
|
||||||||||||
|
Safety / PPE — Zusammenfassung
|
||||||||||||
|
Safety / PPE wird analysiert...
|
||||||||||||
approx.
| kWh | ||||||
|---|---|---|---|---|---|---|
|
KI
|
- | |||||