AI
Workers
Use this position in your own project
The price above is a reference benchmark. OpenConstructionERP lets you reuse this position in a full project estimate — with your regional prices, quantities and margins.
KI
Work Steps
Generating image...
15-30 seconds
Error
:
|
CO₂ (kg)
|
|
Alternative
|
Optimization
|
Where to Buy
|
Safety / PPE
|
|||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KARI-TO-KAME-KARI | Sand | CY | ||||||||||
| KATO-RI-KAME-KAME | Portland cements without additives | ton | ||||||||||
| RITO-ME-KARI-KALI | Pipe fasteners | lb | ||||||||||
| ME_MEKAKA_PUME | Worker Category 1 | hrs | ||||||||||
| KAME-LI-KATO-KAME_KAKAKAME | Water | CY | ||||||||||
| KAME-LI-KALI-RIDX_KAKATOME | Cable | ton | ||||||||||
| KAME-LI-MESA-KATO_KAKAPURI | Bolts with nuts and washers for construction | lb | ||||||||||
| KAME-LI-MEDX-KADX_KAKARIPU | Rubber-fabric pressure hose for water with a pressure of 1 MPa (10 kgf/cm2), inner diameter 1.26 in | LF | ||||||||||
| MEME-ME-KATO-KAME_KAKANELI | Edged softwood timber (spruce, pine), natural moisture content, length 2-6.5 m, width 3.94 in and above, thickness 3.94 in and above, grade III | CY | ||||||||||
| MEVO-TO-KAME-KAME_KAKAKAME | Blower heads | lb | ||||||||||
| RIKA-ME-KARI-KAVO_KAKAKAME | Brass nipple, nominal diameter 1.57 in | lb | ||||||||||
| RIKA-ME-KARI-KAVO_KAKAKARI | Brass nipple, nominal diameter 1.97 in | lb | ||||||||||
| RIKA-RI-KARI-KAME_KAKAMEPU | Polypropylene bushings, diameter 1.65 in | 1000 EA | ||||||||||
| RITO-ME-KAME-KANE_MEKAPUNE | Bellows expansion joint, diameter 3.15 in | EA | ||||||||||
| RITO-TO-KAME-KARI_KAKAKAME | Seamless steel casing pipes for welding, weighted, outer diameter 2.87 in, wall thickness 0.630 in | LF | ||||||||||
| RITO-TO-KAME-KANE_KAKAKAME | Drill pipes made of Group D steel with countersunk ends and couplings, outer diameter 2.87 in, wall thickness 0.276 in | LF | ||||||||||
| RIPU-TO-KASA-MEVO_KAKAKAME | Fitting for steel pipelines, length 7.87 in | EA | ||||||||||
| DXME-KAPU-KAME_KALINE | Drilling rigs on wheeled chassis, drilling depth up to 656.2 ft, load capacity 2.5 t | Machine hours | ||||||||||
| PU_MEKAKA_KANEKA | Personnel: 1 person-hour/machine-hour | Machine hours | ||||||||||
| DXME-KASA-KASA_KAMESA | Mobile cranes, lifting capacity 17.64 ton | Machine hours | ||||||||||
| PU_MEKAKA_KANEKA | Personnel: 1 person-hour/machine-hour | Machine hours | ||||||||||
| DXME-KANE-KATO_KANERI | Electric winches with pulling force up to 31.39 kN (3.2 t) | Machine hours | ||||||||||
| DXME-KANE-KATO_KANERI | Electricity: consumption 0.39 kW·h/machine-hour | Machine hours | ||||||||||
| DXME-KALI-KADX_KAKARI | Automated cementing units, capacity 19.6 CY/h | Machine hours | ||||||||||
| PU_MEKAKA_KATOKA | Personnel: 1 person-hour/machine-hour | Machine hours | ||||||||||
| DXME-KALI-KADX_KAKARI | Electricity: consumption 5.61 kWh/machine-hour | Machine hours | ||||||||||
| DXME-MEPU-KARI_KAKAME | Flatbed trucks, load capacity up to 5 tons | Machine hours | ||||||||||
| PU_MEKAKA_KAPUKA | Personnel: 1 person-hour/machine-hour | Machine hours | ||||||||||
|
CO₂ (kg) — Zusammenfassung
|
||||||||||||
|
CO₂ (kg) wird analysiert...
|
||||||||||||
|
Reg. Price — Zusammenfassung
|
||||||||||||
|
Reg. Price wird analysiert...
|
||||||||||||
|
Alternative — Zusammenfassung
|
||||||||||||
|
Alternative wird analysiert...
|
||||||||||||
|
Optimization — Zusammenfassung
|
||||||||||||
|
Optimization wird analysiert...
|
||||||||||||
|
Where to Buy — Zusammenfassung
|
||||||||||||
|
Where to Buy wird analysiert...
|
||||||||||||
|
Safety / PPE — Zusammenfassung
|
||||||||||||
|
Safety / PPE wird analysiert...
|
||||||||||||
approx.
| kWh | ||||||
|---|---|---|---|---|---|---|
|
KI
|
- | |||||