AI
Workers
Use this position in your own project
The price above is a reference benchmark. OpenConstructionERP lets you reuse this position in a full project estimate — with your regional prices, quantities and margins.
KI
Work Steps
Generating image...
15-30 seconds
Error
:
|
CO₂ (kg)
|
|
Alternative
|
Optimization
|
Where to Buy
|
Safety / PPE
|
|||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RI_MEKAKA_KARI | 2nd grade worker | hrs | ||||||||||
| RI_MEKAKA_KATO | Grade 3 worker | hrs | ||||||||||
| RI_MEKAKA_KAPU | Grade 4 worker | hrs | ||||||||||
| RI_MEKAKA_KASA | Grade 5 worker | hrs | ||||||||||
| RI_MEKAKA_KANE | Grade 6 worker | hrs | ||||||||||
| KAME-TO-KAME-KANE_MEKARISA | Contact grease for rubber parts of sealing systems for sealed cable entries and pipelines in building structures | lb | ||||||||||
| KAME-TO-KAME-KALI_KAKAKADX | Rectified technical ethyl alcohol, grade I | lb | ||||||||||
| KAME-TO-KARI-KADX_KAKARIRI | Propane-butane technical mixture | lb | ||||||||||
| KAME-LI-KARI-MEKA_KAKAKATO | Insulation paper, thickness 0.4 mm | lb | ||||||||||
| KAME-LI-KASA-KATO_KAKAKANE | Glass cloth, type 445, impregnated with silicone varnish, sticky, thickness 0.08 mm | 10 LF | ||||||||||
| KAME-LI-KASA-KADX_KAKAKASA | Electrical sheet textolite, grade B, thickness 0.5-1 mm | lb | ||||||||||
| KAME-LI-KANE-KASA_KAKAPURI | PVC insulating tape for electrical installation and repair work, black, width 0.748 in, thickness 0.18 mm | LF | ||||||||||
| KAME-LI-KANE-MEKA_MEKARIPU | Two-layer heat-shrinkable tapes made of irradiated polyethylene and a layer of fusible sevilen for restoring insulating covers, sealing couplings and sheaths on communication cables, black, width 3.15 in | lb | ||||||||||
| KAME-LI-KANE-MERI_KAKAKANE | Self-adhesive tapes for sealing and waterproofing based on glass fabric and organosilicon rubber for electrical installation and repair work, red, width 1.02 in, thickness 0.5 mm | LF | ||||||||||
| KAME-LI-MEME-KANE_KAKARINE | FK-235 flux | lb | ||||||||||
| KAME-LI-MEME-KALI_KARIRILI | Welding electrodes for welding low-alloy and carbon steels UONI 13/45, E42A, diameter 0.157-0.197 in | lb | ||||||||||
| KAME-LI-MELI-MEME_KAKAKARI | Sanding paper | SF | ||||||||||
| KAME-LI-RIKA-KAVO_KAKARIME | Fireproof impregnated canvas | SF | ||||||||||
| KAME-LI-RIKA-KAVO_KAKATOME | Coarse calico, width 64.57 in, surface density 0.369 oz/SF | 10 LF | ||||||||||
| KAME-LI-RIKA-KAVO_KAMEKARI | Raw mitkal, width 36.22 in, surface density 0.206 oz/SF | 10 LF | ||||||||||
| KAVO-ME-KARI-MELI_KARIKAKA | Tinned copper shielding mesh for cables, width 2.36 in | SF | ||||||||||
| KAVO-TO-KATO-KASA_KAKAMETO | Low-carbon galvanized steel wire for various purposes, diameter 1.6 mm | ton | ||||||||||
| MEKA-RI-KARI-KAVO_KAKAKAME | Round soft electrical copper wire, diameter 1.0-3.0 mm and above | ton | ||||||||||
| MEKA-TO-KARI-KATO_KAKAKARI | Tin-lead solder without antimony in ingots, grade POS30 | lb | ||||||||||
| MERI-RI-KATO-MERI_KAKAKARI | Aluminum foil for technical purposes, soft, rolled, thickness 0.1 mm | lb | ||||||||||
| MEPU-PU-KATO-KASA_KAKAMENE | KO-916 heat-resistant organosilicon varnish | lb | ||||||||||
| MEPU-SA-KADX-KAME_KAKAKAME | Technical acetone, grade I | lb | ||||||||||
| MEPU-SA-KADX-MEME_KAMEKARI | White spirit | lb | ||||||||||
| RIKA-RI-MERI-KAME_KAKAKALI | TKR electrical insulation tube, diameter 0.197 in | 100 LF | ||||||||||
| DXME-KASA-KASA_KAMESA | Mobile cranes, lifting capacity 17.64 ton | Machine hours | ||||||||||
| PU_MEKAKA_KANEKA | Personnel: 1 person-hour/machine-hour | Machine hours | ||||||||||
| DXME-KASA-METO_KAKAME | Flatbed trucks, load capacity up to 6 tons, with crane-manipulator, load capacity 4 tons | Machine hours | ||||||||||
| PU_MEKAKA_KAPUKA | Personnel: 1 person-hour/machine-hour | Machine hours | ||||||||||
| DXME-KANE-KATO_KAPUDX | Manual and lever winches with a pulling force of up to 9.81 kN (1.10 ton) | Machine hours | ||||||||||
| DXME-KANE-KATO_KASASA | Electric winches with a pulling force of 19.62 kN (2.20 ton) | Machine hours | ||||||||||
| DXME-KANE-KATO_KASASA | Electricity: consumption 0.39 kW·h/machine-hour | Machine hours | ||||||||||
| DXME-MEPU-KARI_KAKAME | Flatbed trucks, load capacity up to 5 tons | Machine hours | ||||||||||
| PU_MEKAKA_KAPUKA | Personnel: 1 person-hour/machine-hour | Machine hours | ||||||||||
| DXME-MELI-KAPU_KADXME | Gas injection burners | Machine hours | ||||||||||
| DXME-MELI-KAPU_RITOTO | Welding machines for manual arc welding, welding current up to 350 A | Machine hours | ||||||||||
| DXME-MELI-KAPU_RITOTO | Electricity: consumption 3.7 kWh/machine-hour | Machine hours | ||||||||||
| DXME-MELI-KAPU_SAPUPU | Portable gasoline generators, power up to 8 HP (6 kW) | Machine hours | ||||||||||
| PU_MEKAKA_KAPUKA | Personnel: 1 person-hour/machine-hour | Machine hours | ||||||||||
|
CO₂ (kg) — Zusammenfassung
|
||||||||||||
|
CO₂ (kg) wird analysiert...
|
||||||||||||
|
Reg. Price — Zusammenfassung
|
||||||||||||
|
Reg. Price wird analysiert...
|
||||||||||||
|
Alternative — Zusammenfassung
|
||||||||||||
|
Alternative wird analysiert...
|
||||||||||||
|
Optimization — Zusammenfassung
|
||||||||||||
|
Optimization wird analysiert...
|
||||||||||||
|
Where to Buy — Zusammenfassung
|
||||||||||||
|
Where to Buy wird analysiert...
|
||||||||||||
|
Safety / PPE — Zusammenfassung
|
||||||||||||
|
Safety / PPE wird analysiert...
|
||||||||||||
approx.
| kWh | ||||||
|---|---|---|---|---|---|---|
|
KI
|
- | |||||