Question 1

How much does Hot rolling mill for thick sheet metal:; 118.11 in cost per 100 ton in New York?

Accepted Answer

The estimated cost of Hot rolling mill for thick sheet metal:; 118.11 in is $57.884,84 per 100 ton in New York, based on 64 priced resources covering materials, labour and equipment.

Question 2

How many workers are needed for Hot rolling mill for thick sheet metal:; 118.11 in?

Accepted Answer

Hot rolling mill for thick sheet metal:; 118.11 in requires approximately 1452 people per unit, totalling about 1451 labour hours per 100 ton.

Question 3

What does the Hot rolling mill for thick sheet metal:; 118.11 in cost estimate include?

Accepted Answer

It includes a full breakdown of 64 resources — materials, labour and machinery — with current pricing for New York.


ME_MEKAKA_PUKA	Worker Category 1	hrs
KAME-ME-KAME-KADX_KAKARIDX	General-purpose asbestos cord, diameter 0.591 in	ton
KAME-ME-KARI-KARI_KAKARITO	BE electrical insulation asbestos paper, thickness 0.4-0.5 mm	ton
KAME-ME-KARI-KAPU_KAKAMERI	General-purpose asbestos cardboard, grade KAON-1, thickness 4 and 0.236 in	ton
KAME-ME-KARI-KASA_KAMERIRI	Dry asbestos packings, open weave, round, grade AS, diameter 0.236-0.551 in	ton
KAME-TO-KAME-KALI_KAKAKADX	Rectified technical ethyl alcohol, grade I	lb
KAME-TO-KARI-KATO_KAKAKAME	Acetylene gas, technical grade	CY
KAME-TO-KARI-KAVO_KAKAKAME	Technical gaseous oxygen	CY
KAME-TO-KARI-KADX_KAKARIRI	Propane-butane technical mixture	lb
KAME-TO-KASA-KATO_KAKATOME	Ammonium chloride, chemically pure	ton
KAME-TO-KASA-KALI_KAKAMEME	Borax (sodium tetraborate)	lb
KAME-TO-KASA-MELI_KAKAKARI	Pine rosin	lb
KAME-TO-KASA-RITO_KAMELIME	Calcined soda (sodium carbonate) technical grade	ton
KAME-LI-KARI-KANE_KAKAMELI	Construction cardboard spacer, grade B	ton
KAME-LI-KARI-KALI_KAKAMEME	Pressboard, grade A	lb
KAME-LI-KARI-KADX_KAKAKARI	Paper twine, diameter 2.5 mm	lb
KAME-LI-KATO-KAPU_KAKAKAME	Electricity	kWh
KAME-LI-KASA-KADX_KAKAKATO	Textolite sheet A, thickness from 2.2 to 4.5 mm	lb
KAME-LI-KANE-KASA_KAKAPURI	PVC insulating tape for electrical installation and repair work, black, width 0.748 in, thickness 0.18 mm	LF
KAME-LI-KALI-KAVO_KAKAKATO	Hard laundry soap 72%	EA
KAME-LI-KALI-MELI_KAKAMEME	White carbon black, silicon dioxide mass fraction not less than 88%, moisture mass fraction not more than 6.5%, specific surface area by phenol adsorption 40±108 SF/g	ton
KAME-LI-KALI-RIDX_KAMEKAME	Linen thread	lb
KAME-LI-KAVO-KAPU_KAKAKATO	Natural ground chalk	ton
KAME-LI-MEKA-KASA_KAKAKAME	Ground coke	ton
KAME-LI-MEME-KAPU_KAKASARI	Uncoated welding wire SV-08G2S, diameter 0.079 in	lb
KAME-LI-MEME-KALI_KARIPUNE	Welding electrodes for welding heat-resistant austenitic and high-strength structural steels EA-395, diameter 0.079-0.197 in	lb
KAME-LI-MESA-KARI_KAKAVORI	Steel bolts with hexagonal heads, thread diameter M8 (M10, M12, M14), length 0.630-6.299 in	ton
KAME-LI-MESA-KANE_KAMERIME	Steel construction nails, diameter 1.6 mm, length 1.97 in	ton
KAME-LI-MELI-MEME_KAKAMEME	Two-layer sanding paper with a grain size of 40-25	SF
KAME-LI-MEDX-KAPU_KAKATOME	Rubber gaskets (pressed technical plate)	lb
KAME-LI-MEDX-KADX_KAKARIME	Rubber-fabric pressure hose for water with a pressure of 1 MPa (10 kgf/cm2), inner diameter 0.630 in	LF
KAME-LI-MEDX-MELI_KAKATOSA	Round rubber cord, diameter from 6.0 to 8.0 mm	lb
KAME-LI-RIKA-KARI_KAKAKARI	Coarse technical felt for insulation, dark, thickness 0.315-0.394 in	lb
KAME-LI-RIKA-KAVO_KAKARIME	Fireproof impregnated canvas	SF
KAME-LI-RIKA-KAVO_KAKAPUME	Three-strand twisted rope made of hemp fiber, diameter from 6 to 0.866 in	ton
KAVO-RI-KARI-MEKA_KAKAPUME	Uncoated double-twisted TK rope, 6x37(1+6+12+18)+1x37(1+6+18) construction, grade B, made of uncoated wire, marking group 1570-1770 N/mm2, diameter 6.4 mm	10 LF
MEKA-RI-KARI-KANE_KAKAMENE	Brass strips, cold-rolled, hard, normal precision, grade L63, random length, width 1.57-3.94 in, thickness 3.0 mm	ton
MEKA-TO-KARI-KAME_KAKAKARI	Tin and lead babbitt in ingots, grade B83	ton
MEKA-TO-KARI-KATO_KAKAKARI	Tin-lead solder without antimony in ingots, grade POS30	lb
MEME-ME-KARI-KAPU_KAKATOME	Round coniferous timber, unpeeled, length 3-6.5 m, diameter 14-24 cm, grade II-III	CY
MEME-ME-KATO-KASA_KAKANESA	Unedged coniferous boards, natural moisture content, length 2-6.5 m, width 100-250, thickness 1.18-1.97 in, grade III	CY
MERI-ME-KARI-KANE_MEKAKAVO	Roofing felt RKC-400	SF
MEPU-ME-KAME-KAME_KAKAKAME	Casein glue	ton
MEPU-RI-KARI-KATO_KAKAKAME	Single-component water-dispersion fire-retardant paint for increasing the fire resistance of steel structures up to 90 minutes, intumescent type, mass fraction of non-volatile substances not less than 67%, color white	ton
MEPU-PU-KARI-KAPU_KAMEPURI	MA-0115 oil paint, mummy, iron minium	lb
MEPU-PU-KARI-KAPU_KAMEPUTO	MA-0115 oil paint, ochre	lb
MEPU-PU-KARI-KAPU_KAMENERI	Oil paint MA-011-0, MA-011-1, MA-011-1N, MA-011-2, MA-011-2N	ton
MEPU-PU-KATO-KARI_KAKAMENE	LBS-20 bakelite varnish	ton
MEPU-PU-KATO-KATO_KAMEKARI	BT-577 bitumen varnish	ton
MEPU-PU-KAPU-KAVO_KAKAKAME	PF-115 enamel	ton
MEPU-SA-KASA-KAME_KAKAMERI	Combined drying oil for diluting thick oil paints and for exterior work on wooden surfaces	ton
MEPU-SA-KANE-KARI_KAKAKARI	Chromium oxide-based grinding paste, No. 1, No. 2, No. 3, No. 4	lb
MEPU-SA-KADX-KAME_KAKAKATO	Technical acetone, highest grade	lb
RIME-ME-KASA-KAME_KAKAMEVO	Flexible power cable with copper conductors KG 1x50-660	1000 LF
RIME-ME-KANE-KAVO_KAKARINE	Power cable with aluminum conductors ASB 3x70(oz)-1000	1000 LF
DXME-KASA-KAPU_KAMELI	Electric bridge cranes, lifting capacity 352.74 ton	Machine hours
PU_MEKAKA_KANEKA	Personnel: 1 person-hour/machine-hour	Machine hours
DXME-KASA-KAPU_KAMELI	Electricity: consumption 214.5 kW·h/machine-hour	Machine hours
DXME-KASA-KASA_KAMESA	Mobile cranes, lifting capacity 17.64 ton	Machine hours
PU_MEKAKA_KANEKA	Personnel: 1 person-hour/machine-hour	Machine hours
DXME-MELI-KAPU_RITOTO	Welding machines for manual arc welding, welding current up to 350 A	Machine hours
DXME-MELI-KAPU_RITOTO	Electricity: consumption 3.7 kWh/machine-hour	Machine hours
DXME-MEVO-KAME_KAKALI	Mobile screw compressors with internal combustion engines, pressure up to 0.7 MPa (7 atm), capacity up to 5.4 m3/min	Machine hours
PU_MEKAKA_KAPUKA	Personnel: 1 person-hour/machine-hour	Machine hours
CO₂ (kg) — Zusammenfassung
CO₂ (kg) wird analysiert...

Reg. Price — Zusammenfassung
Reg. Price wird analysiert...

Alternative — Zusammenfassung
Alternative wird analysiert...

Optimization — Zusammenfassung
Optimization wird analysiert...

Where to Buy — Zusammenfassung
Where to Buy wird analysiert...

Safety / PPE — Zusammenfassung
Safety / PPE wird analysiert...

Each step is explained individually:

1Excavation — Machine removal of soil material...

2Loading — Transport of material into wagons...

3Compaction — Soil compaction at destination...

AI description under each work step

QR Code & Share

Zur Kalkulation hinzufügen

Each step is explained individually: 1Excavation — Machine removal of soil material... 2Loading — Transport of material into wagons... 3Compaction — Soil compaction at destination... AI description under each work step

QR Code & Share

Zur Kalkulation hinzufügen

Each step is explained individually:

1Excavation — Machine removal of soil material...

2Loading — Transport of material into wagons...

3Compaction — Soil compaction at destination...

AI description under each work step