AI
Workers
Use this position in your own project
The price above is a reference benchmark. OpenConstructionERP lets you reuse this position in a full project estimate — with your regional prices, quantities and margins.
KI
Work Steps
Generating image...
15-30 seconds
Error
:
|
CO₂ (kg)
|
|
Alternative
|
Optimization
|
Where to Buy
|
Safety / PPE
|
|||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MERI-RI-KAVO-KATO | Thermal insulation cylinders and half-cylinders made of mineral wool with synthetic binder | CY | ||||||||||
| ME_MEKAKA_TOVO | Worker Category 1 | hrs | ||||||||||
| KAME-ME-KARI-MEKA_MEKARIRI | Chrysotile (chrysotile asbestos), group 6K, grades 6K-45, 6K-30, 6K-20, 6K-5 | ton | ||||||||||
| KAME-TO-KARI-KATO_KAKAKAME | Acetylene gas, technical grade | CY | ||||||||||
| KAME-TO-KARI-KATO_KAKAMERI | Dissolved technical acetylene, grade B | ton | ||||||||||
| KAME-TO-KARI-KAVO_KAKAKAME | Technical gaseous oxygen | CY | ||||||||||
| KAME-LI-KATO-KAME_KAKAKAME | Water | CY | ||||||||||
| KAME-LI-KATO-KAPU_KAKAKAME | Electricity | kWh | ||||||||||
| KAME-LI-KALI-RIDX_KAMEKAME | Linen thread | lb | ||||||||||
| KAME-LI-MEME-KALI_KARIRILI | Welding electrodes for welding low-alloy and carbon steels UONI 13/45, E42A, diameter 0.157-0.197 in | lb | ||||||||||
| KAME-LI-RIKA-KAVO_KAKASAME | Colored cotton rags | lb | ||||||||||
| KATO-ME-KARI-KATO_KAKAMESA | Unslaked chlorinated lime for construction, grade A | lb | ||||||||||
| KATO-RI-KAME-KAME_KAKAKAME | Portland cement without additives for general construction CEM 0 32.5N | ton | ||||||||||
| KAPU-TO-KAME-KADX_KAKAMERI | Ready-mixed masonry mortar, cement, M50 | CY | ||||||||||
| KAVO-ME-KARI-MELI_KAMETORI | Single woven steel mesh made of uncoated wire with square cells, wire diameter 1.4 mm, cell size 12x0.472 in | SF | ||||||||||
| KAVO-TO-KARI-KAME_KAKAPUME | Steel packaging tape, soft, normal precision in thickness and width 0.7x0.787-1.969 in | ton | ||||||||||
| KAVO-TO-KATO-KAPU_KAKARIME | General-purpose low-carbon steel wire, diameter 0.8 mm | lb | ||||||||||
| KAVO-TO-KATO-KASA_KAKAMETO | Low-carbon galvanized steel wire for various purposes, diameter 1.6 mm | ton | ||||||||||
| KAVO-TO-KASA-KASA_KAKASAPU | Galvanized sheet steel, thickness 0.8 mm | ton | ||||||||||
| MERI-RI-KATO-MEME_KAKARIPU | T-11-GSV-9 structural glass fabric | SF | ||||||||||
| MEPU-PU-KARI-KAPU_KARITORI | MA-22 oil paint, colored | ton | ||||||||||
| MEPU-SA-KASA-KAME_KAKAMERI | Combined drying oil for diluting thick oil paints and for exterior work on wooden surfaces | ton | ||||||||||
| MEVO-SA-KAVO-KASA_KAKARIRI | Single reinforced steel brackets for mounting radiators, bracket length 5.12 in | 100 EA | ||||||||||
| MEDX-ME-KAME-MEME_KAKAPUSA | Fasteners (clamps) for air ducts STD 205 | ton | ||||||||||
| RITO-TO-KANE-KASA_KAKAKATO | Non-galvanized welded steel pipes for water and gas supply with thread, ordinary, nominal diameter 0.984 in, wall thickness 3.2 mm | LF | ||||||||||
| DXME-KASA-KASA_KAMESA | Mobile cranes, lifting capacity 17.64 ton | Machine hours | ||||||||||
| PU_MEKAKA_KANEKA | Personnel: 1 person-hour/machine-hour | Machine hours | ||||||||||
| DXME-MEKA-KADX_KAMEME | Equipment for hydraulic testing of pipelines, low pressure 0.1 MPa (1 kgf/cm2), high pressure 10 MPa (100 kgf/cm2) | Machine hours | ||||||||||
| DXME-MEKA-KADX_KAMEME | Electricity: consumption 0.5 kW·h/machine-hour | Machine hours | ||||||||||
| DXME-MEPU-KARI_KAKAME | Flatbed trucks, load capacity up to 5 tons | Machine hours | ||||||||||
| PU_MEKAKA_KAPUKA | Personnel: 1 person-hour/machine-hour | Machine hours | ||||||||||
| DXME-MELI-KAPU_KAPURI | Gas welding and cutting equipment | Machine hours | ||||||||||
| DXME-MELI-KAPU_RITOTO | Welding machines for manual arc welding, welding current up to 350 A | Machine hours | ||||||||||
| DXME-MELI-KAPU_RITOTO | Electricity: consumption 3.7 kWh/machine-hour | Machine hours | ||||||||||
| DXME-RIME-RIRI_PUPUTO | Universal electromechanical machines for the manufacture of bands, diaphragms, buckles, power 0.75 kW | Machine hours | ||||||||||
| DXME-RIME-RIRI_PUPUTO | Electricity: consumption 0.25 kW·h/machine-hour | Machine hours | ||||||||||
|
CO₂ (kg) — Zusammenfassung
|
||||||||||||
|
CO₂ (kg) wird analysiert...
|
||||||||||||
|
Reg. Price — Zusammenfassung
|
||||||||||||
|
Reg. Price wird analysiert...
|
||||||||||||
|
Alternative — Zusammenfassung
|
||||||||||||
|
Alternative wird analysiert...
|
||||||||||||
|
Optimization — Zusammenfassung
|
||||||||||||
|
Optimization wird analysiert...
|
||||||||||||
|
Where to Buy — Zusammenfassung
|
||||||||||||
|
Where to Buy wird analysiert...
|
||||||||||||
|
Safety / PPE — Zusammenfassung
|
||||||||||||
|
Safety / PPE wird analysiert...
|
||||||||||||
approx.
| kWh | ||||||
|---|---|---|---|---|---|---|
|
KI
|
- | |||||