AI
Workers
Use this position in your own project
The price above is a reference benchmark. OpenConstructionERP lets you reuse this position in a full project estimate — with your regional prices, quantities and margins.
KI
Work Steps
Generating image...
15-30 seconds
Error
:
|
CO₂ (kg)
|
|
Alternative
|
Optimization
|
Where to Buy
|
Safety / PPE
|
|||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KAME-LI-MELI-KADX | Drill bits, drill bits | EA | ||||||||||
| KARI-RI-KAME-KATO | Expanded clay gravel | CY | ||||||||||
| KARI-RI-KASA-KAPU | Crushed stone | CY | ||||||||||
| KARI-TO-KAME-KARI | Construction sand | CY | ||||||||||
| KATO-RI-KAME-KAME | Portland cements without additives | ton | ||||||||||
| KANE-ME-KAME-KASA | Ceramic brick | 1000 EA | ||||||||||
| KAVO-ME-KASA-KARI | Inlet valves | EA | ||||||||||
| KAVO-ME-KASA-KATO | Galvanized steel pipe for ventilation of the garbage chute shaft | LF | ||||||||||
| KAVO-ME-KASA-KATO | Galvanized steel deflector apron | EA | ||||||||||
| KAVO-ME-KASA-KATO | Steel sleeve for the upper end of the waste chute barrel | EA | ||||||||||
| KAVO-ME-KASA-KATO | Steel damper for ventilation pipe of garbage chute | EA | ||||||||||
| KAVO-ME-KASA-KATO | Round ventilation deflector made of galvanized steel | EA | ||||||||||
| KAVO-ME-KASA-KANE | Cleaning, washing, disinfection and fire extinguishing systems | set | ||||||||||
| KAVO-ME-KASA-KALI | Chutes for garbage chutes | LF | ||||||||||
| KAVO-ME-KASA-KAVO | Steel waste chute gate pipe | EA | ||||||||||
| KAVO-ME-KASA-KAVO | Steel waste chute gate valve | set | ||||||||||
| ME_MEKAKA_TOPU | Worker Category 1 | hrs | ||||||||||
| KAME-LI-KATO-KAME_KAKAKAME | Water | CY | ||||||||||
| KAME-LI-KATO-KAPU_KAKAKAME | Electricity | kWh | ||||||||||
| KAME-LI-KALI-MEKA_KAKAKAME | Cartridges for construction and installation gun, red tip, length 0.394-0.709 in | 1000 EA | ||||||||||
| KAME-LI-KALI-RINE_KAKARINE | Polyethylene foam thermal insulation sealing cord, round solid cross-section, density 25-2.50 lb/ft³, diameter 1.18 in | 100 LF | ||||||||||
| KAME-LI-MEME-KALI_KARIRILI | Welding electrodes for welding low-alloy and carbon steels UONI 13/45, E42A, diameter 0.157-0.197 in | lb | ||||||||||
| KAME-LI-MESA-KATO_KAKAKAME | Anchor bolts made of straight or bent round rods with threads, complete with nuts and washers | ton | ||||||||||
| KAME-LI-MESA-KATO_MEKAKAPU | Bolts for mounting steel structures, complete with nuts and washers, diameter 0.236-0.315 in, length 2.17-3.15 in | lb | ||||||||||
| KAME-LI-MESA-KANE_KAMEMEME | Construction nails | ton | ||||||||||
| KAME-LI-MESA-KALI_MEKASANE | Galvanized steel dowel nails with washers, diameter 4.5 mm, length 1.18-2.36 in | ton | ||||||||||
| KAVO-ME-KASA-KATO_MEKAMEPU | Steel support flange, inner diameter 17.72 in, flange height 1.97 in, outer pipe diameter 15.43 in | EA | ||||||||||
| KAVO-ME-KASA-KATO_MEKARIRI | Metal fastening clamp for fastening the apron of the garbage chute shaft, width 2.36 in, clamp diameter 11.02 in | EA | ||||||||||
| KAVO-ME-KASA-KAPU_KAKAMEME | Metal waste bin with lid, without wheels, capacity 750 l, dimensions 930x958x41.73 in | set | ||||||||||
| KAVO-ME-KASA-KASA_KAKAKAME | Steel support for garbage chute shaft with rubber gasket, support diameter 24.80 in, support height 19.69 in, steel thickness 0.236 in | EA | ||||||||||
| KAVO-ME-KASA-KANE_KAKAKARI | Steel head for cleaning, washing, disinfection, and fire extinguishing system for waste chute shaft, head diameter 21.65 in, length 57.87 in, steel thickness 1.5 mm | EA | ||||||||||
| KAVO-TO-KATO-KANE_KAKAMERI | Low-carbon steel knitting wire | ton | ||||||||||
| KAVO-PU-KATO-KATO_KAKATOKA | Hot-rolled reinforcing steel with periodic profile, class A-III, diameter 0.315 in | ton | ||||||||||
| MEME-ME-KATO-KANE_KAKALIKA | Edged board of coniferous species, natural moisture content, length 2-6.5 m, width 3.94-9.84 in, thickness 0.984 in, grade II | CY | ||||||||||
| MEPU-PU-KARI-KAPU_KAMELISA | MA-15 oil paint, iron red | ton | ||||||||||
| MEPU-SA-KAME-KALI_KAMETOPU | Single-component silicone-based sealant, neutral, universal | gal | ||||||||||
| MEDX-ME-KAME-MEME_MEKAPUKA | Quick-release clamp made of galvanized steel with microporous rubber, diameter 12.40 in | EA | ||||||||||
| RIME-ME-KANE-KADX_KAMEMEDX | Power cable with copper conductors VVGng(A) 5x2.5ok(N, PE)-660 | 1000 LF | ||||||||||
| RIPU-RI-KAPU-KAME_MEKAMERI | Flexible reinforced water supply hoses, anti-vibration, complete with gaskets, diameter 0.591 in, length 19.69 in | set | ||||||||||
| DXME-KASA-KAME_KAMELI | Tower cranes, lifting capacity 8.82 ton | Machine hours | ||||||||||
| PU_MEKAKA_KANEKA | Personnel: 1 person-hour/machine-hour | Machine hours | ||||||||||
| DXME-KASA-KAME_KAMELI | Electricity: consumption 6.83 kWh/machine-hour | Machine hours | ||||||||||
| DXME-MEPU-KARI_KAKAME | Flatbed trucks, load capacity up to 5 tons | Machine hours | ||||||||||
| PU_MEKAKA_KAPUKA | Personnel: 1 person-hour/machine-hour | Machine hours | ||||||||||
| DXME-MELI-KAPU_KATOPU | Welding units with internal combustion engines for manual arc welding, welding current up to 400 A, number of stations 1 | Machine hours | ||||||||||
|
CO₂ (kg) — Zusammenfassung
|
||||||||||||
|
CO₂ (kg) wird analysiert...
|
||||||||||||
|
Reg. Price — Zusammenfassung
|
||||||||||||
|
Reg. Price wird analysiert...
|
||||||||||||
|
Alternative — Zusammenfassung
|
||||||||||||
|
Alternative wird analysiert...
|
||||||||||||
|
Optimization — Zusammenfassung
|
||||||||||||
|
Optimization wird analysiert...
|
||||||||||||
|
Where to Buy — Zusammenfassung
|
||||||||||||
|
Where to Buy wird analysiert...
|
||||||||||||
|
Safety / PPE — Zusammenfassung
|
||||||||||||
|
Safety / PPE wird analysiert...
|
||||||||||||
approx.
| kWh | ||||||
|---|---|---|---|---|---|---|
|
KI
|
- | |||||