AI
Workers
Use this position in your own project
The price above is a reference benchmark. OpenConstructionERP lets you reuse this position in a full project estimate — with your regional prices, quantities and margins.
KI
Work Steps
Generating image...
15-30 seconds
Error
:
|
CO₂ (kg)
|
|
Alternative
|
Optimization
|
Where to Buy
|
Safety / PPE
|
|||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MEVO-SA-KAVO-MEVO | Cementing valve outlets | EA | ||||||||||
| ME_MEKAKA_PURI | Worker Category 1 | hrs | ||||||||||
| KAME-LI-KATO-KAME_KAKAKAME | Water | CY | ||||||||||
| KAME-LI-MEME-KALI_KARIRILI | Welding electrodes for welding low-alloy and carbon steels UONI 13/45, E42A, diameter 0.157-0.197 in | lb | ||||||||||
| KAME-LI-MESA-KALI_KAKAPUTO | Concrete dowel nails for mounting gun in plastic sleeve, nail diameter 3.05 mm, nail length 2.56 in | ton | ||||||||||
| KAME-LI-MEDX-KAPU_KAKAKARI | Rolled vulcanized rubber plates | lb | ||||||||||
| KAPU-TO-KAME-KADX_KAKAMEPU | Ready-mixed masonry mortar, cement, M100 | CY | ||||||||||
| KALI-RI-KALI-MERI_KAKAKAME | Auxiliary metal structures predominantly made of thick-gauge steel or rolled sections, with or without holes | ton | ||||||||||
| KAVO-TO-KATO-KANE_KAKAKARI | Hot-rolled wire in coils, diameter 6.3-6.5 mm | ton | ||||||||||
| RIPU-TO-KATO-METO_KAKAKAME | Polyethylene pressure pipes, except for PE100 gas pipes, for water transportation, standard dimensional ratio SDR11, nominal outer diameter 1.26 in, wall thickness 3.0 mm | LF | ||||||||||
| RIPU-TO-KATO-METO_KAKARIRI | Polyethylene pressure pipes, except for PE100 gas pipes, for water transportation, standard dimensional ratio SDR13.6, nominal outer diameter 1.57 in, wall thickness 3.0 mm | LF | ||||||||||
| RIPU-TO-KATO-METO_KAKAPURI | Polyethylene pressure pipes, except for PE100 gas pipes, for water transportation, standard dimensional ratio SDR17, nominal outer diameter 1.97 in, wall thickness 3.0 mm | LF | ||||||||||
| DXME-KAPU-KAME_KASATO | Self-propelled rotary drilling rigs, drilling depth up to 164.0 ft, hole diameter 4.13 in | Machine hours | ||||||||||
| PU_MEKAKA_KASAKA | Personnel: 1 person-hour/machine-hour | Machine hours | ||||||||||
| DXME-KASA-KASA_KAMESA | Mobile cranes, lifting capacity 17.64 ton | Machine hours | ||||||||||
| PU_MEKAKA_KANEKA | Personnel: 1 person-hour/machine-hour | Machine hours | ||||||||||
| DXME-MEPU-KARI_KAKAME | Flatbed trucks, load capacity up to 5 tons | Machine hours | ||||||||||
| PU_MEKAKA_KAPUKA | Personnel: 1 person-hour/machine-hour | Machine hours | ||||||||||
| DXME-MELI-KAPU_MELIME | Welding machines for manual arc welding, welding current up to 500 A | Machine hours | ||||||||||
| DXME-MELI-KAPU_MELIME | Electricity: consumption 7.92 kW·h/machine-hour | Machine hours | ||||||||||
| DXME-MEDX-KAPU_KAKARI | Drilling pumps for pumping flushing fluid, flow rate up to 41.9 CY/h, pressure up to 1312.3 ft | Machine hours | ||||||||||
| DXME-MEDX-KAPU_KAKARI | Electricity: consumption 16.5 kW·h/machine-hour | Machine hours | ||||||||||
|
CO₂ (kg) — Zusammenfassung
|
||||||||||||
|
CO₂ (kg) wird analysiert...
|
||||||||||||
|
Reg. Price — Zusammenfassung
|
||||||||||||
|
Reg. Price wird analysiert...
|
||||||||||||
|
Alternative — Zusammenfassung
|
||||||||||||
|
Alternative wird analysiert...
|
||||||||||||
|
Optimization — Zusammenfassung
|
||||||||||||
|
Optimization wird analysiert...
|
||||||||||||
|
Where to Buy — Zusammenfassung
|
||||||||||||
|
Where to Buy wird analysiert...
|
||||||||||||
|
Safety / PPE — Zusammenfassung
|
||||||||||||
|
Safety / PPE wird analysiert...
|
||||||||||||
approx.
| kWh | ||||||
|---|---|---|---|---|---|---|
|
KI
|
- | |||||