AI
Workers
Use this position in your own project
The price above is a reference benchmark. OpenConstructionERP lets you reuse this position in a full project estimate — with your regional prices, quantities and margins.
KI
Work Steps
Generating image...
15-30 seconds
Error
:
|
CO₂ (kg)
|
|
Alternative
|
Optimization
|
Where to Buy
|
Safety / PPE
|
|||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ME_MEKAKA_SALI | Worker Category 1 | hrs | ||||||||||
| KAME-TO-KARI-KANE_KAKAMEME | Carbon dioxide | ton | ||||||||||
| KAME-LI-KATO-KAPU_KAKAKAME | Electricity | kWh | ||||||||||
| KAME-LI-MEME-KAPU_KAKAMEME | Self-shielded flux-cored wire for mechanized semi-automatic welding without the use of shielding gases for welding carbon and low-alloy steels, classification E71T8-K6, diameter 1.73 mm | ton | ||||||||||
| KAME-LI-MEME-KAPU_KAKASARI | Uncoated welding wire SV-08G2S, diameter 0.079 in | lb | ||||||||||
| MEME-ME-KATO-KAME_KAKANELI | Edged softwood timber (spruce, pine), natural moisture content, length 2-6.5 m, width 3.94 in and above, thickness 3.94 in and above, grade III | CY | ||||||||||
| DXME-MEKA-KASA_KAKAVO | Pipe layers, nominal load capacity 22.05 ton | Machine hours | ||||||||||
| PU_MEKAKA_KAVOKA | Personnel: 1 person-hour/machine-hour | Machine hours | ||||||||||
| DXME-MEKA-MEKA_KAMEME | Internal hydraulic centering devices for pipes with a diameter of 19.69-23.62 in | Machine hours | ||||||||||
| DXME-MELI-KAME_KAKAPU | Welding rectifiers, welding current up to 500 A, number of posts 1 | Machine hours | ||||||||||
| DXME-MELI-KAME_KAKAPU | Electricity: consumption 7.92 kW·h/machine-hour | Machine hours | ||||||||||
| DXME-MELI-KATO_KAMEME | Induction diesel heaters, generator power 174 HP (130 kW), engine power 190 HP (140 kW) | Machine hours | ||||||||||
| DXME-MELI-KAPU_KARIME | Pipe welding units on a crawler tractor chassis with a diesel generator station, power 168 HP (125 kW) for 6 welding stations (excluding welding equipment) | Machine hours | ||||||||||
| PU_MEKAKA_KASAKA | Personnel: 1 person-hour/machine-hour | Machine hours | ||||||||||
| DXME-MELI-KAPU_KASARI | Pulse welding current source for semi-automatic welding, welding current up to 350 A | Machine hours | ||||||||||
| DXME-MELI-KAPU_KASARI | Electricity: consumption 1.65 kW·h/machine-hour | Machine hours | ||||||||||
| DXME-MELI-KAPU_METOME | Four-roller wire feed mechanisms, wire feed speed 0.5-25 m/min, welding wire diameter 0.8-2.4 mm | Machine hours | ||||||||||
| DXME-MELI-KAPU_METORI | Four-roller wire feed mechanisms, wire feed speed 2-59.1 ft/min, welding wire diameter 0.8-1.6 mm | Machine hours | ||||||||||
|
CO₂ (kg) — Zusammenfassung
|
||||||||||||
|
CO₂ (kg) wird analysiert...
|
||||||||||||
|
Reg. Price — Zusammenfassung
|
||||||||||||
|
Reg. Price wird analysiert...
|
||||||||||||
|
Alternative — Zusammenfassung
|
||||||||||||
|
Alternative wird analysiert...
|
||||||||||||
|
Optimization — Zusammenfassung
|
||||||||||||
|
Optimization wird analysiert...
|
||||||||||||
|
Where to Buy — Zusammenfassung
|
||||||||||||
|
Where to Buy wird analysiert...
|
||||||||||||
|
Safety / PPE — Zusammenfassung
|
||||||||||||
|
Safety / PPE wird analysiert...
|
||||||||||||
approx.
| kWh | ||||||
|---|---|---|---|---|---|---|
|
KI
|
- | |||||